Raven-industries SCS 450 Manual de usuario descargar pdf (Pagina 22)

Chapter 4

18 SCS 450 Serial Interface Installation & Service Manual

Control Valve Installation

Install the Control Valve

FIGURE 9. Control Valve Installation Diagram

Note: This plumbing schematic applies only to applications of 3 GPM [11 lit/min] or greater. For flow less

than 3 GPM [11 lit/min], the motorized control valve is mounted on a bypass line. Refer to the

Alternate Bypass Line Plumbing System section on page 19 for the alternate bypass line plumbing

procedure.

1. Install the control valve on the main hose line between the flow meter and the booms, with the motor in the

upright position. Refer to the diagram above.

2. Connect the yellow and green 2-pin connector of the flow control cable to the control valve.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Sin comentarios

Raven-industries SCS 450 Manual de usuario Pagina 22